Arduino.TW樂園

Arduino + Virtools Release 0.5 beta1

中文使用說明：

1.使用此BB請先安裝好Virtools 4.0環境跟Arduino軟體，並確定您的Arduino所連接的Com Port 號碼。

2.下載 ArduinoToVirtools.dll ，並放到您的 ( C:Program FilesVirtoolsVirtools 4.0BuildingBlocks ) 資料夾內

3.啟動 Arduino 軟體，將基本測試範例貼上並上傳到您的Arduino上。

4.開啟Virtools軟體，在左邊Category內會出現Arduino類別，並拖入Arduino到您的Schematic內。

5.將BB的Start連接上，並且把BB的Out連回左邊的LoopIn，形成一個使得迴圈連續即時取得資料。

6.注意!! 在按下Virtools Play時，請先確定BB的上方參數Com Port是否與您的Arduino Com Port相同。

7.從Arduino取得的數值會從BB的下方輸出參數ArduinoData輸出，輸出型態為String。

功能版本說明：

2007 2/13 ...0.5 beta1  本版只能在第一次按下Virtools的Play時候，前面參數都顯示True時有效，但按下Restore IC時候會抓不到Arduino，必須重開Virtools之後才可以繼續使用。

檔案下載：

0.5 beta1 >> Download <<

作者：

Shih-Ta Liu@TNUA ( 這個 E-mail 地址已經被防止灌水惡意程式保護，您需要啟用 Java Script 才能觀看 )

-----------------------------------------------------------------------------------------------------------------------------------------

English Language

1.Uses this BB to ask install first the good 4.0 environments of Virtools follow the Arduino software, and makes sure the number of Com Port that your Arduino link.

2.download the ArduinoToVirtools.dll, and put to your ( C: he Program FilesVirtoolsVirtools 4.0BuildingBlocks) data to clip inside

3.the start Arduino software, post basic test example up also up spread to your Arduino up.

4.open the Virtools software, on the left meeting inside the Category appears the Arduino category, and drags along to go to your Schematic into the Arduino inside.

5.link BB Start up, and connect the LoopIn of return the left side to the BB Out, become a to make the loop consecution immediately obtained the data.

6.attention!! While press the Virtools Play, please make sure first the BB above the parameter Com Port whether with your the Port homology of Arduino Com.

7.the number that obtain from the Arduino will under output the parameter ArduinoData to output from the BB, outputting the type as String.

The function edition explanation:2007 2/13

Download << 0.5beta1